0-360 degree Pipe Rolling Machines
- Bending round pipe and square pipe
- Suitable for thin-wall mild steel, stainless steel pipe
- Applicated in Decorative engineering, hardware products, pipe transportation industry elbows, Industrial plants, vegetable greenhouses,
- iron gates, fitness equipment, vehicles and ships, and other industrial elbows
Specifications
The machine’s features are driven by a worm gearbox, rolling back and forth to form and bend; it can adjust the bending radius, suitable for significant radius bending or rounding.
each size roller consist of one middle forming roll and two side driven rolls
middle forming roll guarantee the bending diameter, bending degree max 360 degree
Specification
This machine can bend up to 76mm round tube and 50mm square tube
supplied with cast dies:
●Round Formers (in): 5/8″, 3/4″, 7/8″, 1″, 1″-1/4″, 1-1/2″, 2″, 2-1/2″, 3″
/Round Formers (mm): 16, 19, 22, 25, 32, 38, 51, 63, 76
●Square Formers (in): 5/8″, 3/4″, 7/8″, 1″, 1-3/16″, 1-1/2″, 1-37/64″, 2″
/Square Formers (mm): 16, 19, 22, 25, 30, 38, 40, 50
Power: 1500 Watts, 1400rpm
Motors available run on
110 Voltage Single phase, 60Hz
220 Voltage Single phase, 50Hz
220 Voltage Single phase, 60Hz
380 Voltage Three-phase, 50Hz
Three type avaible
HHW-G76 is basic type
HHW-76B with outer cover which’s more safe
Customized one is equiped Foot pedal with emergancy stop
| Former type | Former Sizes (mm) | Wall thickness of stainless steel tube (mm) | Wall thickness of mild steel tube (mm) |
| Former for round tubes | 16 | 0.5 | 0.8 |
| 19 | 0.8 | 1.0 | |
| 22 | 1.0 | 1.2 | |
| 25 | 1.0 | 1.2 | |
| 32 | 1.2 | 1.5 | |
| 38 | 1.2 | 1.5 | |
| 51 | 1.5 | 1.8 | |
| 63 | 1.6 | 1.8 | |
| 76 | 2.0 | 2.3 |
| Former type | Sizes | Wall thickness of stainless steel tube (mm) | Wall thickness of mild steel tube (mm) |
| Former for square tubes | 16 | 0.5 | 0.8 |
| 19 | 0.8 | 1.0 | |
| 22 | 1.0 | 1.2 | |
| 25 | 1.0 | 1.2 | |
| 30 | 1.2 | 1.5 | |
| 38 | 1.2 | 1.5 | |
| 40 | 1.5 | 1.8 | |
| 50 | 1.5 | 1.8 |
